Discover DUMMAR bespoke forged wheels, with every set built to order for your vehicle and preferred specification. Explore our wheel designs with custom sizing, offsets, colours and finishes.
All designs are available in 1-piece monoblock, 2-piece and 3-piece configurations, allowing you to discuss the construction best suited to your chosen design and vehicle application.
Available in 20, 21, 22, 23 and 24-inch diameters, DUMMAR forged wheels can be specified for luxury SUVs, luxury vehicles and supercars. A wide selection of bespoke finishes and colours is available.
Final wheel proportions, concavity, dimensions and fitment depend on the selected design, vehicle, wheel width, offset and other technical requirements.
Before production begins, you will receive a technical drawing and a 3D design showing your wheel's intended specification. Production will commence only after you have reviewed and approved the finished 3D design.
Choose a design below and request a personal quotation.
Available in 20, 21, 22, 23 and 24-inch sizes, subject to design and vehicle fitment.
Three Construction Options
Every design is available in 1-piece monoblock, 2-piece and 3-piece configurations, subject to confirmation of the chosen specification.
Bespoke Finishes
Extensive colour, finish and surface-treatment options.
Vehicle-Specific Fitment
Wheel dimensions, widths, offsets and concavity determined according to the selected vehicle and specification.
Technical Drawing and 3D Design
A visual and technical representation of the proposed wheel before production.
Customer Approval Before Production
Production starts only after the customer approves the final 3D design.
Made to Order
Each set is specified for the individual customer's requirements.
Explore Wheel Designs
DMR.01 — Bespoke Forged Wheel
DMR.01 combines slender, branching spokes with large open sections and sharply defined edges. The spokes extend toward the outer rim, while recessed details add depth around the centre. Shown in a bright metallic finish, this custom forged wheel has an open, technical appearance that can be tailored through your chosen size, offset and finish.
Available diameters
20 / 21 / 22 / 23 / 24 inches
Construction
1-piece monoblock / 2-piece / 3-piece
Specification
Bespoke sizing, offset, colour and finish, subject to vehicle fitment and technical confirmation.
Images are illustrative. Each set is built to order; production begins only after approval of the final 3D design.
Full bespoke specification information
Images are for illustration purposes only. The final product may differ depending on wheel size, offset and vehicle configuration. Each set is built to order. Before production begins, you will receive a technical drawing and a 3D design reflecting your chosen specifications. Production will commence only after you approve the finished 3D design.
We offer an extensive range of colours, finishes and sizes. Every design is available in 1-piece monoblock, 2-piece and 3-piece configurations, subject to confirmation of the chosen design and technical specification. Fully bespoke designs can also be discussed to meet individual requirements.
DMR.02 centres on a smooth disc-style face, interrupted by three large openings near the perimeter. A ring of smaller recesses adds detail around the rim, while the rounded transition into the hub keeps the central surface clean. The broad face gives your chosen colour or metallic finish a prominent role in the final design.
Available diameters
20 / 21 / 22 / 23 / 24 inches
Construction
1-piece monoblock / 2-piece / 3-piece
Specification
Bespoke sizing, offset, colour and finish, subject to vehicle fitment and technical confirmation.
Images are illustrative. Each set is built to order; production begins only after approval of the final 3D design.
Full bespoke specification information
Images are for illustration purposes only. The final product may differ depending on wheel size, offset and vehicle configuration. Each set is built to order. Before production begins, you will receive a technical drawing and a 3D design reflecting your chosen specifications. Production will commence only after you approve the finished 3D design.
We offer an extensive range of colours, finishes and sizes. Every design is available in 1-piece monoblock, 2-piece and 3-piece configurations, subject to confirmation of the chosen design and technical specification. Fully bespoke designs can also be discussed to meet individual requirements.
DMR.03 pairs a broad, sculpted centre with a contrasting outer band of geometric openings. The face steps inward toward the centre cap, creating a layered appearance between the hub and rim. In the illustrated specification, the dark centre and bright perimeter emphasise the wheel's circular form and the detail of its outer edge.
Available diameters
20 / 21 / 22 / 23 / 24 inches
Construction
1-piece monoblock / 2-piece / 3-piece
Specification
Bespoke sizing, offset, colour and finish, subject to vehicle fitment and technical confirmation.
Images are illustrative. Each set is built to order; production begins only after approval of the final 3D design.
Full bespoke specification information
Images are for illustration purposes only. The final product may differ depending on wheel size, offset and vehicle configuration. Each set is built to order. Before production begins, you will receive a technical drawing and a 3D design reflecting your chosen specifications. Production will commence only after you approve the finished 3D design.
We offer an extensive range of colours, finishes and sizes. Every design is available in 1-piece monoblock, 2-piece and 3-piece configurations, subject to confirmation of the chosen design and technical specification. Fully bespoke designs can also be discussed to meet individual requirements.
DMR.04 places a fine radial lattice around a smooth central disc. Narrow, repeated openings create a detailed outer band, framed by a substantial rim edge. The design combines an almost closed central face with intricate perimeter detailing, giving this forged wheel a different visual rhythm from an open-spoke design.
Available diameters
20 / 21 / 22 / 23 / 24 inches
Construction
1-piece monoblock / 2-piece / 3-piece
Specification
Bespoke sizing, offset, colour and finish, subject to vehicle fitment and technical confirmation.
Images are illustrative. Each set is built to order; production begins only after approval of the final 3D design.
Full bespoke specification information
Images are for illustration purposes only. The final product may differ depending on wheel size, offset and vehicle configuration. Each set is built to order. Before production begins, you will receive a technical drawing and a 3D design reflecting your chosen specifications. Production will commence only after you approve the finished 3D design.
We offer an extensive range of colours, finishes and sizes. Every design is available in 1-piece monoblock, 2-piece and 3-piece configurations, subject to confirmation of the chosen design and technical specification. Fully bespoke designs can also be discussed to meet individual requirements.
DMR.05 uses closely spaced, slender spokes that radiate from the centre cap toward the rim. The repeated lines create a finely detailed face, with narrow openings between them and a strong sense of depth toward the hub. Its dense radial pattern makes the relationship between surface finish, light and shadow central to the design.
Available diameters
20 / 21 / 22 / 23 / 24 inches
Construction
1-piece monoblock / 2-piece / 3-piece
Specification
Bespoke sizing, offset, colour and finish, subject to vehicle fitment and technical confirmation.
Images are illustrative. Each set is built to order; production begins only after approval of the final 3D design.
Full bespoke specification information
Images are for illustration purposes only. The final product may differ depending on wheel size, offset and vehicle configuration. Each set is built to order. Before production begins, you will receive a technical drawing and a 3D design reflecting your chosen specifications. Production will commence only after you approve the finished 3D design.
We offer an extensive range of colours, finishes and sizes. Every design is available in 1-piece monoblock, 2-piece and 3-piece configurations, subject to confirmation of the chosen design and technical specification. Fully bespoke designs can also be discussed to meet individual requirements.
DMR.06 has a layered mesh pattern formed by slender spokes that intersect around the centre and open out toward the rim. Small geometric openings near the hub transition into larger spaces at the perimeter. This creates a richly detailed face with a continuous pattern across the wheel, shown here in a dark metallic finish.
Available diameters
20 / 21 / 22 / 23 / 24 inches
Construction
1-piece monoblock / 2-piece / 3-piece
Specification
Bespoke sizing, offset, colour and finish, subject to vehicle fitment and technical confirmation.
Images are illustrative. Each set is built to order; production begins only after approval of the final 3D design.
Full bespoke specification information
Images are for illustration purposes only. The final product may differ depending on wheel size, offset and vehicle configuration. Each set is built to order. Before production begins, you will receive a technical drawing and a 3D design reflecting your chosen specifications. Production will commence only after you approve the finished 3D design.
We offer an extensive range of colours, finishes and sizes. Every design is available in 1-piece monoblock, 2-piece and 3-piece configurations, subject to confirmation of the chosen design and technical specification. Fully bespoke designs can also be discussed to meet individual requirements.
DMR.07 combines narrow, angular spokes with sharply defined splits and large open sections. The spoke ends meet a stepped outer rim, adding geometric detail around the perimeter. Its open layout emphasises the individual spoke shapes and the depth of the face, with final concavity determined by the specification for your vehicle.
Available diameters
20 / 21 / 22 / 23 / 24 inches
Construction
1-piece monoblock / 2-piece / 3-piece
Specification
Bespoke sizing, offset, colour and finish, subject to vehicle fitment and technical confirmation.
Images are illustrative. Each set is built to order; production begins only after approval of the final 3D design.
Full bespoke specification information
Images are for illustration purposes only. The final product may differ depending on wheel size, offset and vehicle configuration. Each set is built to order. Before production begins, you will receive a technical drawing and a 3D design reflecting your chosen specifications. Production will commence only after you approve the finished 3D design.
We offer an extensive range of colours, finishes and sizes. Every design is available in 1-piece monoblock, 2-piece and 3-piece configurations, subject to confirmation of the chosen design and technical specification. Fully bespoke designs can also be discussed to meet individual requirements.
DMR.08 uses broad, sculpted spokes that divide into angular branches toward the rim. Recessed surfaces and crisp edges create contrasting planes across the face, while large openings separate the spoke groups. The design has a substantial, architectural appearance, with the illustrated dark finish drawing attention to its raised surfaces and contours.
Available diameters
20 / 21 / 22 / 23 / 24 inches
Construction
1-piece monoblock / 2-piece / 3-piece
Specification
Bespoke sizing, offset, colour and finish, subject to vehicle fitment and technical confirmation.
Images are illustrative. Each set is built to order; production begins only after approval of the final 3D design.
Full bespoke specification information
Images are for illustration purposes only. The final product may differ depending on wheel size, offset and vehicle configuration. Each set is built to order. Before production begins, you will receive a technical drawing and a 3D design reflecting your chosen specifications. Production will commence only after you approve the finished 3D design.
We offer an extensive range of colours, finishes and sizes. Every design is available in 1-piece monoblock, 2-piece and 3-piece configurations, subject to confirmation of the chosen design and technical specification. Fully bespoke designs can also be discussed to meet individual requirements.
DMR.09 pairs a deeply recessed-looking centre with long, angular spoke branches and large open sections. Fine edge details run along the spokes, while stepped surfaces add definition where they meet the rim. The illustrated design emphasises depth and an open face; the final proportions and concavity depend on wheel dimensions and vehicle fitment.
Available diameters
20 / 21 / 22 / 23 / 24 inches
Construction
1-piece monoblock / 2-piece / 3-piece
Specification
Bespoke sizing, offset, colour and finish, subject to vehicle fitment and technical confirmation.
Images are illustrative. Each set is built to order; production begins only after approval of the final 3D design.
Full bespoke specification information
Images are for illustration purposes only. The final product may differ depending on wheel size, offset and vehicle configuration. Each set is built to order. Before production begins, you will receive a technical drawing and a 3D design reflecting your chosen specifications. Production will commence only after you approve the finished 3D design.
We offer an extensive range of colours, finishes and sizes. Every design is available in 1-piece monoblock, 2-piece and 3-piece configurations, subject to confirmation of the chosen design and technical specification. Fully bespoke designs can also be discussed to meet individual requirements.
DMR.10 combines broad geometric spoke sections with triangular openings and recessed detailing. The repeated shapes create a layered face, with pronounced edges separating the raised surfaces from the darker pockets. This custom forged wheel offers a bold, mechanical appearance that can be emphasised with a single-colour or contrasting finish.
Available diameters
20 / 21 / 22 / 23 / 24 inches
Construction
1-piece monoblock / 2-piece / 3-piece
Specification
Bespoke sizing, offset, colour and finish, subject to vehicle fitment and technical confirmation.
Images are illustrative. Each set is built to order; production begins only after approval of the final 3D design.
Full bespoke specification information
Images are for illustration purposes only. The final product may differ depending on wheel size, offset and vehicle configuration. Each set is built to order. Before production begins, you will receive a technical drawing and a 3D design reflecting your chosen specifications. Production will commence only after you approve the finished 3D design.
We offer an extensive range of colours, finishes and sizes. Every design is available in 1-piece monoblock, 2-piece and 3-piece configurations, subject to confirmation of the chosen design and technical specification. Fully bespoke designs can also be discussed to meet individual requirements.
DMR.11 frames its open-spoke centre with a wide perimeter ring containing elongated openings. In the illustrated specification, a warm contrasting ring surrounds a dark wheel face, making the outer edge a defining feature. The combination of slim spokes and a substantial rim treatment offers a distinctive way to introduce contrast into your wheel specification.
Available diameters
20 / 21 / 22 / 23 / 24 inches
Construction
1-piece monoblock / 2-piece / 3-piece
Specification
Bespoke sizing, offset, colour and finish, subject to vehicle fitment and technical confirmation.
Images are illustrative. Each set is built to order; production begins only after approval of the final 3D design.
Full bespoke specification information
Images are for illustration purposes only. The final product may differ depending on wheel size, offset and vehicle configuration. Each set is built to order. Before production begins, you will receive a technical drawing and a 3D design reflecting your chosen specifications. Production will commence only after you approve the finished 3D design.
We offer an extensive range of colours, finishes and sizes. Every design is available in 1-piece monoblock, 2-piece and 3-piece configurations, subject to confirmation of the chosen design and technical specification. Fully bespoke designs can also be discussed to meet individual requirements.
DMR.12 uses sharply angled spokes to create a star-like arrangement across the wheel face. Faceted surfaces lead outward to alternating open and textured sections near the rim. The layered outer details and pronounced spoke edges give the design a technical appearance, shown in a dark finish that highlights its contrasting surfaces.
Available diameters
20 / 21 / 22 / 23 / 24 inches
Construction
1-piece monoblock / 2-piece / 3-piece
Specification
Bespoke sizing, offset, colour and finish, subject to vehicle fitment and technical confirmation.
Images are illustrative. Each set is built to order; production begins only after approval of the final 3D design.
Full bespoke specification information
Images are for illustration purposes only. The final product may differ depending on wheel size, offset and vehicle configuration. Each set is built to order. Before production begins, you will receive a technical drawing and a 3D design reflecting your chosen specifications. Production will commence only after you approve the finished 3D design.
We offer an extensive range of colours, finishes and sizes. Every design is available in 1-piece monoblock, 2-piece and 3-piece configurations, subject to confirmation of the chosen design and technical specification. Fully bespoke designs can also be discussed to meet individual requirements.
DMR.13 features a dense arrangement of slender, branching spokes with angular intersections around the centre. The pattern becomes more open toward the outer rim, creating a transition from fine central detail to longer, clearer lines. Shown in a warm metallic finish, the design combines a mesh-like centre with a pronounced radial structure.
Available diameters
20 / 21 / 22 / 23 / 24 inches
Construction
1-piece monoblock / 2-piece / 3-piece
Specification
Bespoke sizing, offset, colour and finish, subject to vehicle fitment and technical confirmation.
Images are illustrative. Each set is built to order; production begins only after approval of the final 3D design.
Full bespoke specification information
Images are for illustration purposes only. The final product may differ depending on wheel size, offset and vehicle configuration. Each set is built to order. Before production begins, you will receive a technical drawing and a 3D design reflecting your chosen specifications. Production will commence only after you approve the finished 3D design.
We offer an extensive range of colours, finishes and sizes. Every design is available in 1-piece monoblock, 2-piece and 3-piece configurations, subject to confirmation of the chosen design and technical specification. Fully bespoke designs can also be discussed to meet individual requirements.
DMR.14 is defined by a honeycomb-style pattern of connected polygonal openings. The cells change shape as they extend from the hub toward the rim, creating a continuous geometric face. The illustrated warm metallic centre contrasts with a dark outer barrel, emphasising the outline of each opening and the depth between the surfaces.
Available diameters
20 / 21 / 22 / 23 / 24 inches
Construction
1-piece monoblock / 2-piece / 3-piece
Specification
Bespoke sizing, offset, colour and finish, subject to vehicle fitment and technical confirmation.
Images are illustrative. Each set is built to order; production begins only after approval of the final 3D design.
Full bespoke specification information
Images are for illustration purposes only. The final product may differ depending on wheel size, offset and vehicle configuration. Each set is built to order. Before production begins, you will receive a technical drawing and a 3D design reflecting your chosen specifications. Production will commence only after you approve the finished 3D design.
We offer an extensive range of colours, finishes and sizes. Every design is available in 1-piece monoblock, 2-piece and 3-piece configurations, subject to confirmation of the chosen design and technical specification. Fully bespoke designs can also be discussed to meet individual requirements.
DMR.15 combines broad angular spokes with rectangular cut-outs and intersecting geometric surfaces. The layered arrangement creates a directional impression across the face, with deep-looking pockets separating the raised sections. Shown in a warm metallic finish, the design emphasises strong edges and substantial spoke shapes rather than a fine mesh pattern.
Available diameters
20 / 21 / 22 / 23 / 24 inches
Construction
1-piece monoblock / 2-piece / 3-piece
Specification
Bespoke sizing, offset, colour and finish, subject to vehicle fitment and technical confirmation.
Images are illustrative. Each set is built to order; production begins only after approval of the final 3D design.
Full bespoke specification information
Images are for illustration purposes only. The final product may differ depending on wheel size, offset and vehicle configuration. Each set is built to order. Before production begins, you will receive a technical drawing and a 3D design reflecting your chosen specifications. Production will commence only after you approve the finished 3D design.
We offer an extensive range of colours, finishes and sizes. Every design is available in 1-piece monoblock, 2-piece and 3-piece configurations, subject to confirmation of the chosen design and technical specification. Fully bespoke designs can also be discussed to meet individual requirements.
DMR.16 uses slender angular branches to form an open lattice across the wheel face. The spokes split and change direction as they approach the rim, creating a series of irregular geometric openings. In the illustrated specification, bright spoke faces contrast with dark recesses and an outer ring of circular details.
Available diameters
20 / 21 / 22 / 23 / 24 inches
Construction
1-piece monoblock / 2-piece / 3-piece
Specification
Bespoke sizing, offset, colour and finish, subject to vehicle fitment and technical confirmation.
Images are illustrative. Each set is built to order; production begins only after approval of the final 3D design.
Full bespoke specification information
Images are for illustration purposes only. The final product may differ depending on wheel size, offset and vehicle configuration. Each set is built to order. Before production begins, you will receive a technical drawing and a 3D design reflecting your chosen specifications. Production will commence only after you approve the finished 3D design.
We offer an extensive range of colours, finishes and sizes. Every design is available in 1-piece monoblock, 2-piece and 3-piece configurations, subject to confirmation of the chosen design and technical specification. Fully bespoke designs can also be discussed to meet individual requirements.
DMR.17 combines slender radial spokes with a sculpted web of openings around the centre. Long recessed details and a continuous outer rim give the design a layered, precise appearance. The illustrated metallic finish highlights the transitions between the spoke faces and their deeper surfaces.
Available diameters
20 / 21 / 22 / 23 / 24 inches
Construction
1-piece monoblock / 2-piece / 3-piece
Specification
Bespoke sizing, offset, colour and finish, subject to vehicle fitment and technical confirmation.
Images are illustrative. Each set is built to order; production begins only after approval of the final 3D design.
Full bespoke specification information
Images are for illustration purposes only. The final product may differ depending on wheel size, offset and vehicle configuration. Each set is built to order. Before production begins, you will receive a technical drawing and a 3D design reflecting your chosen specifications. Production will commence only after you approve the finished 3D design.
We offer an extensive range of colours, finishes and sizes. Every design is available in 1-piece monoblock, 2-piece and 3-piece configurations, subject to confirmation of the chosen design and technical specification. Fully bespoke designs can also be discussed to meet individual requirements.
DMR.18 features an open split-spoke design, with paired branches extending from the centre toward the rim. Small sculpted openings and recessed surfaces add detail to the spokes, while the large spaces between them keep the wheel face visually open.
Available diameters
20 / 21 / 22 / 23 / 24 inches
Construction
1-piece monoblock / 2-piece / 3-piece
Specification
Bespoke sizing, offset, colour and finish, subject to vehicle fitment and technical confirmation.
Images are illustrative. Each set is built to order; production begins only after approval of the final 3D design.
Full bespoke specification information
Images are for illustration purposes only. The final product may differ depending on wheel size, offset and vehicle configuration. Each set is built to order. Before production begins, you will receive a technical drawing and a 3D design reflecting your chosen specifications. Production will commence only after you approve the finished 3D design.
We offer an extensive range of colours, finishes and sizes. Every design is available in 1-piece monoblock, 2-piece and 3-piece configurations, subject to confirmation of the chosen design and technical specification. Fully bespoke designs can also be discussed to meet individual requirements.
DMR.19 uses five paired spoke groups with long slots and sharply defined surfaces. Recessed details continue around the outer rim, connecting the spoke design with the wheel's perimeter. The illustrated metallic finish emphasises the depth and layered geometry.
Available diameters
20 / 21 / 22 / 23 / 24 inches
Construction
1-piece monoblock / 2-piece / 3-piece
Specification
Bespoke sizing, offset, colour and finish, subject to vehicle fitment and technical confirmation.
Images are illustrative. Each set is built to order; production begins only after approval of the final 3D design.
Full bespoke specification information
Images are for illustration purposes only. The final product may differ depending on wheel size, offset and vehicle configuration. Each set is built to order. Before production begins, you will receive a technical drawing and a 3D design reflecting your chosen specifications. Production will commence only after you approve the finished 3D design.
We offer an extensive range of colours, finishes and sizes. Every design is available in 1-piece monoblock, 2-piece and 3-piece configurations, subject to confirmation of the chosen design and technical specification. Fully bespoke designs can also be discussed to meet individual requirements.
DMR.20 features five open spoke groups with elongated cut-outs and sculpted transitions around the centre. Broad openings between the spokes reveal the barrel, while recessed details around the rim continue the design across the wheel face.
Available diameters
20 / 21 / 22 / 23 / 24 inches
Construction
1-piece monoblock / 2-piece / 3-piece
Specification
Bespoke sizing, offset, colour and finish, subject to vehicle fitment and technical confirmation.
Images are illustrative. Each set is built to order; production begins only after approval of the final 3D design.
Full bespoke specification information
Images are for illustration purposes only. The final product may differ depending on wheel size, offset and vehicle configuration. Each set is built to order. Before production begins, you will receive a technical drawing and a 3D design reflecting your chosen specifications. Production will commence only after you approve the finished 3D design.
We offer an extensive range of colours, finishes and sizes. Every design is available in 1-piece monoblock, 2-piece and 3-piece configurations, subject to confirmation of the chosen design and technical specification. Fully bespoke designs can also be discussed to meet individual requirements.
Select one of the DMR.01–DMR.20 designs or enquire about a fully bespoke wheel concept.
02
Confirm Your Vehicle and Requirements
Provide your vehicle make, model, year and any relevant modifications. Discuss your preferred diameter, wheel widths, offsets, construction type, colour and finish.
03
Technical Specification
The required dimensions, fitment, brake clearance and other technical considerations must be reviewed before the specification is finalised.
04
Technical Drawing and 3D Design
A technical drawing and a 3D design will be provided to show the proposed wheel specification before production.
05
Customer Approval
Review the proposed design and confirm your approval. Production must not begin before approval of the finished 3D design.
06
Made-to-Order Production
Following approval and confirmation of the final order requirements, the wheels proceed to production.
Create Your Bespoke DUMMAR Forged Wheels
Whether you have selected one of our DMR wheel designs or have a completely individual concept in mind, contact Premier Auto Design to discuss your requirements.
Tell us about your vehicle, preferred wheel diameter, desired construction, finish and any existing modifications. Our team can help establish the information required to develop a suitable bespoke specification and quotation.