MOSHAMMER

MOSHAMMER Porsche 992.2 Carrera GTS

Premium Refinement Programme

The Porsche 992.2 represents the latest evolution of the iconic Porsche 911. MOSHAMMER brings a distinctive interpretation of OEM+ design to the Carrera GTS, combining carefully developed aerodynamic components with a refined, performance-inspired aesthetic.

From sculpted GT EVO Front Spoiler Wings and signature rear diffusers to performance side skirts, rear spoilers and precision-designed wing end blades, the MOSHAMMER programme offers a range of ways to personalise the latest-generation 911.

Each component is designed to complement the original Porsche styling while creating a more individual and purposeful presence.

MOSHAMMER — Where Perfection Meets Dynamism.

Explore the aerodynamic packages and individual styling components below. Contact Premier Auto Design for product enquiries, compatibility confirmation and quotations.

MOSHAMMER Porsche 992.2 Carrera GTS — Complete Aero Kits

Complete Aero Kit

MOSHAMMER 992.2 GTS EVO Base Kit

Pure Design. Maximum Impact.

Fitted to the vehicle

Description

The MOSHAMMER EVO Base Kit introduces a distinctive aerodynamic upgrade for the Porsche 992.2 Carrera GTS. Developed for Coupe, Cabriolet and Targa models, this package combines the GT EVO Front Spoiler Wings, the signature GT EVO Rear Diffuser and Performance Side Skirts.

The front spoiler wings feature a motorsport-inspired profile designed to reduce front-axle lift and contribute to aerodynamic balance. At the rear, the distinctive split-fin diffuser creates a wider, more purposeful appearance. Wider-than-standard side skirts complete the transformation with a lower, more athletic visual stance.

The result is a cohesive OEM+ styling package that enhances the Carrera GTS while respecting the original Porsche design.

Kit Components

  • 2 × GT EVO Front Spoiler Wings — P992.42.1022
  • 1 × GT EVO Rear Diffuser — P992.42.3042
  • 2 × Performance Side Skirts — P992.40.2020

Information

Compatibility

Compatible with Porsche 992.2 Carrera GTS Coupe, Cabriolet and Targa.

Not suitable for Carrera T, Carrera S or Carrera 4S models according to the supplied specification.

Finish

All parts are supplied in satin black, ready for installation.

Installation

Components use original Porsche mounting points where specified.

Front Spoiler Wings: clips and original-equipment screws. Side Skirts: original-equipment clips and screws. Rear Diffuser: original-equipment screws and supplied specialist adhesive.

Professional installation is recommended.

Complete Aero Kit

MOSHAMMER 992.2 GTS EVO R Kit

Pure Design. Maximum Impact.

Fitted to the vehicle

Description

The MOSHAMMER EVO R Kit builds on the EVO aerodynamic concept by combining GT EVO Front Spoiler Wings, a distinctive GT EVO Rear Diffuser, Performance Side Skirts and Wing End Blades.

Inspired by motorsport design, the package creates a sharper, wider and more purposeful appearance. The front spoiler wings contribute to front-end aerodynamic balance, while the split-fin rear diffuser enhances the visual width of the vehicle.

The Wing End Blades introduce an additional styling detail to the rear wing, while the performance side skirts complete the cohesive exterior treatment.

Kit Components

  • 2 × GT EVO Front Spoiler Wings — P992.42.1022
  • 1 × GT EVO Rear Diffuser — P992.42.3042
  • 2 × Performance Side Skirts — P992.40.2020
  • 2 × Wing End Blades — choose one finish: P992.42.3050 (unpainted) or P992.42.3055 (gloss carbon)

Information

Compatibility

Exclusively compatible with Porsche 992.2 Carrera GTS Coupe according to the supplied specification.

Not suitable for Carrera T, Carrera S or Carrera 4S models.

Finish

Main kit components: satin black. Wing End Blade finish depends on the selected option.

Installation

Front Spoiler Wings: clips, original-equipment screws and specialist adhesive. Side Skirts: original-equipment clips and screws. Wing End Blades: specified specialist adhesive. Rear Diffuser: original-equipment screws and supplied specialist adhesive.

Professional installation is recommended.

Complete Aero Kit

MOSHAMMER 992.2 GTS EVO Pro Kit

A More Exclusive Interpretation of the Carrera GTS.

Fitted to the vehicle

Description

The MOSHAMMER EVO Pro Kit represents a more comprehensive interpretation of the Porsche 992.2 Carrera GTS, combining the GT EVO aerodynamic package with a choice of the iconic Ducktail Evo II or Ducktail Evo III rear spoiler.

Developed around MOSHAMMER's OEM+ philosophy, the package complements the original Porsche body lines while creating a more distinctive, GT-inspired appearance.

Sculpted front spoiler wings, performance side skirts and the GT EVO rear diffuser establish a cohesive aerodynamic profile. The selected Ducktail adds a distinctive finishing detail inspired by Porsche's sporting heritage.

Kit Components

  • 2 × GT EVO Front Spoiler Wings — P992.42.1022
  • 2 × Performance Side Skirts — P992.40.2020
  • 1 × GT EVO Rear Diffuser — P992.42.3042
  • Choice of Ducktail Evo II or Ducktail Evo III

Information

Compatibility

Not suitable for Cabriolet or Targa models.

Please contact Premier Auto Design to confirm the exact Coupe configuration and the compatibility of the selected Ducktail.

Finish and certification

The supplied specification states that the kit is delivered primed in satin black and ready to paint. Mounting hardware and a TÜV parts certificate under §19.3 are stated as included.

Installation

Front Spoiler Wings: clips, original-equipment screws and specialist adhesive. Side Skirts: original-equipment clips and screws. Ducktail: original-equipment screws and mounting points. Rear Diffuser: original-equipment screws and supplied specialist adhesive.

The Ducktail replaces the original electrically extendable rear spoiler. The original spoiler mechanism must be disassembled.

For Ducktail Evo II and Evo III, the original upper third brake light remains in use, subject to correct installation.

For vehicles with the Aero-Kit fixed wing, the supplied specification states that the third brake light from the original electrically extendable spoiler configuration must be used. Part number: 992.945.211.C. This part is not included according to the supplied specification for this installation.

The automatic spoiler-lift function must be deactivated. Depending on vehicle configuration, coding to a fixed rear-spoiler setting may be required.

This is a technical vehicle component intended for installation by suitably qualified personnel with the appropriate tools, diagnostic equipment and workshop facilities. Additional vehicle-specific work may be required, including coding and commissioning. This work is not part of the product itself and is not included in the purchase of the Ducktail.

MOSHAMMER provides installation instructions and, where applicable, coding guidance and technical support. Correct installation, coding and commissioning remain the responsibility of the customer and/or the workshop performing the work. If the required expertise or equipment is unavailable, installation must be carried out by a suitably qualified specialist workshop.

Complete Aero Kit

MOSHAMMER 992.2 GTS EVO Kit

Pure Design. Maximum Impact.

Fitted to the vehicle

Description

The MOSHAMMER EVO Kit is intended to provide a coordinated aerodynamic styling package for the Porsche 992.2 Carrera GTS.

The supplied description references a front spoiler, rear diffuser, rear lid spoiler and performance side skirts. Together, these components are intended to create a more defined and athletic exterior appearance while respecting the original Porsche design language.

The front spoiler enhances the visual character of the front bumper, while the rear diffuser creates a more purposeful rear profile. The rear lid spoiler adds a subtle styling detail, and the performance side skirts complete the vehicle's lower profile.

Information

The full component list, article numbers and compatibility for this kit are being confirmed with MOSHAMMER for the 992.2. Please contact Premier Auto Design to confirm the exact configuration for your vehicle.

The supplied information states that components are satin black, ready to install.

Installation

Components generally use original mounting points unless specified otherwise. Component-specific installation requirements will be confirmed with the final kit configuration.

Complete Aero Kit

MOSHAMMER 992.2 GTS EVO S Kit

Engineered to Enhance. Designed to Impress.

Fitted to the vehicle

Description

The MOSHAMMER EVO S Kit is presented as a coordinated aerodynamic upgrade for the Porsche 992.2 Carrera GTS.

The supplied copy references Front Spoiler Wings, a Rear Diffuser, a Rear Lid Spoiler and Performance Side Skirts. The package is intended to complement Porsche's original styling while creating a sharper, wider and more dynamic appearance.

Information

The full component list, article numbers and compatibility for this kit are being confirmed with MOSHAMMER for the 992.2. Please contact Premier Auto Design to confirm the exact configuration for your vehicle.

Installation

Installation requirements will be confirmed with the final kit configuration. Please contact Premier Auto Design for guidance.

MOSHAMMER Porsche 992.2 Carrera GTS — Individual Styling Parts

Individual Component

MOSHAMMER 992.2 Front Spoiler Wings GT EVO

Engineered for Balance. Shaped for Performance.

Fitted to the vehicle

Description

The GT EVO Front Spoiler Wings are developed for the Porsche 992.2 Carrera T, Carrera S, Carrera 4S and Carrera GTS. Their distinctive geometry is designed to reduce front-axle lift and contribute to aerodynamic balance.

Inspired by GT RS styling and adapted for the Carrera range, the wings follow the original bumper contours to create a refined, performance-led appearance.

Information

Supplied in satin black, ready to mount.

Installation

The GT EVO Front Spoiler Wings mount to the original screw points and clips, replacing the factory bumper side spoilers according to the supplied specification.

Installation is described as a direct fit using the specified clips and original-equipment screws. Confirm fitment against the exact vehicle before installation.

Individual Component

MOSHAMMER 992 RS Fender Louvers

Description

The MOSHAMMER 992 RS Fender Louvers combine motorsport-inspired design with advanced aerodynamic performance for the Porsche 992.

The integrated ventilation openings help release hot brake air and reduce high-pressure buildup inside the wheel arches.

This improves airflow around the front axle, reduces lift, increases high-speed stability, and supports more consistent braking performance during dynamic driving.

This makes them the ideal solution for non-RS Porsche 992 models seeking a more aggressive and performance-focused character.

The integrated hexagon aluminum mesh protects the ventilation openings while adding an authentic motorsport detail to the overall design.

The MOSHAMMER 992 RS Fender Louvers deliver the perfect balance of performance, functionality, and OEM+ styling for the Porsche 992.

Information

Delivered in satin black or gloss carbon.

Compatible with all Porsche 992.1 and 992.2 Carrera, T, S, 4S, GTS, GT3 and Turbo S models (Coupé, Cabriolet and Targa).

The louvers can be installed as a pure design enhancement to achieve the distinctive RS-inspired appearance, or they can be fully integrated by precisely opening the air outlets to utilise the complete aerodynamic and functional performance benefits described above.

Installation

Installation is quick and clean using our special adhesive.

Individual Component

MOSHAMMER 992 Carbon Mirror Caps

MOSHAMMER Upper Carbon Side Mirror Housings (L+R) – Porsche 992 Carrera

Description

MOSHAMMER crafts the carbon mirror caps for the Porsche 992 with a premium OEM+ design. Therefore, adding exclusivity and accentuating the car’s sporty character. Moreover, we deliver each set in a high-gloss finish, designed as standard for left-hand drive vehicles.

Our carbon mirror package offers the advantage of using the original mounting points, thus, ensuring a precise fit. We manufacture each housing from high-quality carbon fibre.

Compatible with all Porsche 992 Carrera, T, S, 4S, GTS, S/T, GT3 and Turbo S (Coupé, Cabriolet, Targa) left-hand-drive vehicles (LHD).

Information

Compatible with all Porsche 992.1 and 992.2 Carrera, T, S, 4S, GTS, S/T, GT3 and Turbo S (Coupé, Cabriolet, Targa) left-hand-drive vehicles (LHD).

Installation

Remove the original mirror caps, then position the new MOSHAMMER carbon caps and secure them using the original click and screw mounting points.

Individual Component

MOSHAMMER 992 Ducktail Evo I

Fitted to the vehicle

Description

Unique Look

The most prominent feature of the MOSHAMMER Porsche 992 Ducktail Evo I is its stepped style like a swan tail. This spoiler gives your 992 a unique and eye-catching appearance. It is an attractive option for Porsche owners who want to personalise their vehicles, making them stand out with the Porsche 911 992 ducktail spoiler.

Cooling Solution

Our ram-air ducts are designed in such a way that they are even larger than those of the Porsche 992 Turbo S. We also wanted to improve engine performance by increasing the amount of air that cools the intercoolers. Larger ram-air ducts also ensure that more air flows into the engine compartment, thus having a positive effect on the overall temperature.

Fixed Spoiler

After installing the ducktail, the lift function becomes deactivated and, of course, it remains static.

TÜV-Approved Components

TÜV (Technischer Überwachungsverein) approval is an important feature. TÜV is a recognised organisation that certifies the safety and quality of automotive components.

Thus, the Porsche 911 992 ducktail spoiler brings out the sheer brilliance and an engineering marvel to your Porsche.

Fitment

Suitable for Porsche 992.1 and 992.2 Coupé models: Carrera, T, S, 4S, GTS and GT3 Touring.

Not suitable for 992 Cabriolet and Targa models.

Information

Delivered in satin black and includes mounting material.

Supplied with a TÜV parts certificate (§19.3).

Suitable for Porsche 992.1 and 992.2 Coupé models: Carrera, T, S, 4S, GTS and GT3 Touring.

Not suitable for 992 Cabriolet and Targa models.

Installation

Replaces the original electric rear spoiler; the original spoiler mechanism must be disassembled.

The original third brake light at the top remains in place and continues to operate as intended.

The automatic spoiler lift function must be deactivated. Depending on the vehicle configuration, this requires coding to a fixed rear spoiler setting, similar to the factory configuration used on models equipped with the fixed Aero-Kit rear wing.

This component is installed using the original mounting points.

Please note: This product is a technical vehicle component intended to be installed by persons with the appropriate technical knowledge, tools and workshop equipment.

Depending on the vehicle configuration, additional work may be required after installation, including vehicle coding as described above. Such installation work, coding, diagnostic work and any other vehicle-specific adjustments are not part of the product itself and are not included in the purchase of the Ducktail.

MOSHAMMER provides installation instructions and, where applicable, coding instructions and technical support to assist with the installation. However, the correct installation, coding and commissioning of the component remain the responsibility of the customer and/or the workshop carrying out the work.

If you or your workshop do not have the necessary technical knowledge, diagnostic equipment or ability to carry out the installation and any required coding correctly, the work must be performed by a suitably qualified specialist workshop.

Individual Component

MOSHAMMER 992 Ducktail Evo II

Fitted to the vehicle

Description

A tribute to the legendary Porsche 911 Carrera RS Mighty Ducktail of the 1970s, the MOSHAMMER 992 Ducktail Evo II combines timeless design with cutting-edge technology.

Revolutionary Design

The integrated ram-air ducts in the spoiler enhance performance and cooling efficiency. They surpass the 992 Sport Classic and Turbo S inlets, setting a new standard for cooling the intercoolers, intake ports and engine compartment.

Perfect Fit

TÜV tested and certified for high-speed and track performance, our Evo I, II and III series Ducktails for the 992 are designed to ensure optimal aerodynamics and stability with a seamless OEM fit.

By eliminating adjustability, the fixed design delivers consistent downforce, enhancing the overall performance of your Porsche while reflecting the elegant design of the Porsche 992 Sport Classic.

The MOSHAMMER Ducktail Evo II is engineered to maintain full visibility and functionality of the original top-mounted third brake light, integrated into the rear-window engine-cover grille.

This ducktail fits the Porsche 992, delivering a performance-focused styling upgrade while elevating its appearance.

The Ducktail Evo II for the Porsche 911 992 offers a combination of performance, design and practicality.

Information

Delivered primed in satin black and ready for painting.

Includes mounting material.

Supplied with a TÜV parts certificate (§19.3).

Suitable for Porsche 992.1 and 992.2 Coupé models: Carrera, T, S, 4S, GTS and GT3 Touring, subject to the specific fitment restriction below.

Not suitable for 992 Cabriolet and Targa models.

For the Porsche 992 GT3 Touring, the TÜV-compliant GT3 Ducktail Evo III must be selected.

Installation

Replaces the original electric rear spoiler; the original spoiler mechanism must be disassembled.

The original third brake light at the top remains in place and continues to operate as intended.

The automatic spoiler lift function must be deactivated. Depending on the vehicle configuration, this requires coding to a fixed rear spoiler setting, similar to the factory configuration used on models equipped with the fixed Aero-Kit rear wing.

This component is installed using the original mounting points.

Please note: This product is a technical vehicle component intended to be installed by persons with the appropriate technical knowledge, tools and workshop equipment.

Depending on the vehicle configuration, additional work may be required after installation, including vehicle coding as described above. Such installation work, coding, diagnostic work and any other vehicle-specific adjustments are not part of the product itself and are not included in the purchase of the Ducktail.

MOSHAMMER provides installation instructions and, where applicable, coding instructions and technical support to assist with the installation. However, the correct installation, coding and commissioning of the component remain the responsibility of the customer and/or the workshop carrying out the work.

If you or your workshop do not have the necessary technical knowledge, diagnostic equipment or ability to carry out the installation and any required coding correctly, the work must be performed by a suitably qualified specialist workshop.

Individual Component

MOSHAMMER 992 GT3 Ducktail Evo III

MOSHAMMER 992 GT3 Ducktail Evo III for Porsche 992 GT3 Touring

Fitted to the vehicle

Description

The MOSHAMMER 992 GT3 Ducktail Evo III combines classic Porsche heritage with a modern OEM+ design. Our Mighty Ducktail gives the Porsche 992 GT3 Touring a timeless and unmistakable appearance.

Designed specifically for the Porsche 992 GT3 Touring, the Evo III features integrated ram-air ducts that guide airflow directly into the engine compartment. The result is an aggressive motorsport-inspired look combined with intelligent aerodynamic functionality.

The Ducktail Evo III is developed to fit perfectly using the original Porsche mounting points. Its static spoiler design follows the clean and iconic silhouette of the Porsche 992 Sport Classic while maintaining an elegant OEM+ character.

The original third brake light remains fully functional and is seamlessly integrated into the design using the supplied frame solution.

Highlights

  • Developed for Porsche 992.1 and 992.2 GT3 Touring models.
  • Integrated ram-air ducts for optimised airflow.
  • Uses original Porsche mounting points.
  • Static spoiler design.
  • Original third brake light remains in use.
  • MOSHAMMER, exclusive OEM+ designed refinement for Porsche.
  • Designed and engineered in Berlin, Germany, MOSHAMMER delivers premium aerodynamic solutions.

Information

Delivered primed in satin black, including the necessary mounting material.

The original third brake light from the electrically extendable spoiler remains in use.

Supplied with a TÜV parts certificate (§19.3).

Suitable for Porsche 992.1 and 992.2 GT3 Touring.

Please note: Not suitable as a plug-and-play solution for the Porsche 992 GT3 with the larger wing. However, with small modifications, it is also possible to mount the ducktail.

Installation

Replaces the original electric rear spoiler; the original spoiler mechanism must be disassembled.

The original third brake light at the top remains in place and continues to operate as intended.

The automatic spoiler lift function must be deactivated. Depending on the vehicle configuration, this requires coding to a fixed rear spoiler setting, similar to the factory configuration used on models equipped with the fixed Aero-Kit rear wing.

This component is installed using the original mounting points.

Please note: This product is a technical vehicle component intended to be installed by persons with the appropriate technical knowledge, tools and workshop equipment.

Depending on the vehicle configuration, additional work may be required after installation, including vehicle coding as described above. Such installation work, coding, diagnostic work and any other vehicle-specific adjustments are not part of the product itself and are not included in the purchase of the Ducktail.

MOSHAMMER provides installation instructions and, where applicable, coding instructions and technical support to assist with the installation. However, the correct installation, coding and commissioning of the component remain the responsibility of the customer and/or the workshop carrying out the work.

If you or your workshop do not have the necessary technical knowledge, diagnostic equipment or ability to carry out the installation and any required coding correctly, the work must be performed by a suitably qualified specialist workshop.

Individual Component

MOSHAMMER 992 Rear Lid Spoiler

Fitted to the vehicle

Description

The MOSHAMMER 992 Carrera Rear Lid Spoiler combines a distinctive OEM+ appearance with carefully considered aerodynamic styling.

Its raised rear extension offers a more pronounced profile than the original design while retaining the functionality of the Porsche active rear-spoiler system.

Designed to integrate with the original vehicle hardware, the Rear Lid Spoiler offers a refined alternative to a fixed ducktail for owners seeking a more understated yet distinctive exterior upgrade.

Information

Product article: P992.40.3022.

Supplied in satin black with mounting material.

TÜV parts certificate (§19.3), according to the supplied product information.

Compatible with the stated Porsche 992 Carrera T, Carrera S, Carrera 4, Carrera 4S, GTS and GT3 Touring applications, subject to manufacturer fitment confirmation.

Installation

Unless specified otherwise, MOSHAMMER components are typically installed using original screw points and, where needed, secured with a special adhesive.

Individual Component

MOSHAMMER 992 Active Aero Emulator

Description

The MOSHAMMER Active Aero Emulator is the solution for Porsche 992 vehicles converted to a fixed rear wing or ducktail. It reliably prevents error messages that may occur when the active aero system is removed. As a result, no active aero warning messages appear.

After installation, the vehicle operates as if no electric rear spoiler is installed.

When using a ducktail with an integrated third brake light, such as the MOSHAMMER Ducktail Evo III, the installation is completely plug-and-play.

When using a ducktail without an integrated third brake light, such as the MOSHAMMER Ducktail Evo II, only the third brake light cable needs to be redirected to the original third brake light located in the upper grille below the rear window.

MOSHAMMER Premium Refinement.

Information

Fits

  • Porsche 992.1 models from 2019 to 2024 with OEM ECU 992.907.479 S.
  • Porsche 992.2 models from model year 2025 with OEM ECU 992.907.479 S.

Does not fit

  • Porsche 992.2 models from model year 2026 with OEM ECU 992.907.479 T.

Important

Installation instructions differ depending on whether the vehicle has the Ducktail Evo II without a brake light or Evo III with a brake light installed.

It is important to follow the correct instructions for the relevant version, particularly regarding the third brake light.

If the vehicle is equipped with a different control unit, which a Porsche dealer can confirm, the emulator cannot be used. In that case, the spoiler is coded out in the standard way using PIWIS, as is common practice.

Installation

Any qualified mechanic can perform the installation.

The MOSHAMMER Active Aero Emulator P992.20.3080 replaces the original control unit and simply plugs into the original factory connector.

Individual Component

MOSHAMMER 992 Side Skirts

Fitted to the vehicle

Description

The MOSHAMMER 992 Performance Side Skirts provide optimal aerodynamic properties while being beautiful OEM+ design elements. Thus, the side skirts create a unique look for your Porsche 911 992.

Our performance side skirts are significantly wider than the standard components, resulting in a wider underbody and therefore more downforce.

Functionality of the 992 Performance Side Skirts

A fusion of design and technology that transforms your Porsche 992 into a masterpiece of sophistication. MOSHAMMER has meticulously designed the 992 Performance Side Skirts to ensure seamless integration into your Porsche, delivering a balance of styling and aerodynamics.

Each MOSHAMMER component undergoes rigorous testing, including road and track evaluations, earning QM-TÜV certification for reliability.

This refinement adds to the distinctive appearance of your Porsche, combining performance-focused design, reliability and visual impact.

Information

Delivered in satin black and includes mounting material.

Supplied with a TÜV parts certificate (§19.3).

Suitable for Porsche 992.1 and 992.2 Coupé, Cabriolet and Targa models: Carrera, T, S, 4S, GTS and GT3 Touring.

Installation

MOSHAMMER components are installed using original screw points and clips.

Individual Component

MOSHAMMER 992 Wing End Blades

Fitted to the vehicle

Description

A small detail with a very big impact!

The MOSHAMMER Wing End Blades were developed specifically for the original Porsche SportDesign AeroKit rear wing of the 992. The 992 winglets are not a simple add-on part, but a precise and purposeful enhancement.

With the installation of our Wing End Blades, the character of the standard rear wing changes fundamentally. The flat factory appearance evolves into a clearly defined GT wing look with significantly more presence and technical depth.

The end plates of our blades give the rear a distinctive and unmistakable GT silhouette.

Beyond the visual upgrade, the 992 Winglets are designed to improve airflow management around the existing rear wing. The lateral boundaries help stabilise airflow and reduce turbulence, allowing the available wing surface to work more effectively.

The result is a distinctive GT look that clearly sets the Porsche 992 apart from the standard version without appearing excessive. The lines remain harmonious and the integration appears factory-designed. Pure MOSHAMMER OEM+ design.

For owners seeking an exclusive and technically considered upgrade, the MOSHAMMER Wing End Blades combine design, function and a refined appearance.

Information

Available in satin black or gloss carbon, ready to mount.

Fits

  • Porsche 992.1, model years 2019–2024, with factory SportDesign Exclusive Manufaktur rear wing.
  • Porsche 992.2, model years 2025–2026, with factory SportDesign Exclusive Manufaktur rear wing.

Installation

The Wing End Blades are designed to mount directly onto the original factory SportDesign AeroKit rear wing.

Installation is straightforward. The Wing End Blades are positioned, attached and bonded in place using the manufacturer's specified special adhesive for a secure fit.

Individual Component

MOSHAMMER 992.2 Rear Diffuser GT EVO

Distinctive Design. Function-led Styling.

Fitted to the vehicle

Description

The MOSHAMMER Rear Diffuser GT EVO for the Porsche 992.2 Carrera GTS transforms the rear profile with a sharper, more defined presence while staying true to the OEM+ design philosophy.

Its signature split-fin design emphasises the vehicle's visual width, creating a powerful, performance-focused appearance without disrupting the original lines of the Porsche 911.

Developed for the specified 992.2 GTS configuration, the diffuser integrates into the vehicle's design with a distinctive GT-inspired finish.

Information

Part number: P992.42.3042.

Finish: satin black, ready to mount.

Installation

Installed using the original mounting points and secured with the specified specialist adhesive.

Confirm the correct vehicle configuration and installation instructions before fitting.

Enquire About MOSHAMMER Porsche 992.2 Carrera GTS

Discover the MOSHAMMER aerodynamic programme for the Porsche 992.2 Carrera GTS through Premier Auto Design.

Contact our team for further information on the available kits, individual components, vehicle compatibility, finishes and installation requirements.